The Maintenance Schedule for the CNC Machines

CNC machines provide high-level performance for the manufacturing industry by working for lengthy periods. Therefore, you’ll need to follow a strict maintenance schedule to keep it working at an efficient level. The experts at our CNC machine tool distributor in Georgia and Southeast have prepared this guide for you and divided the schedule you need to follow on a daily, weekly, and monthly basis.

Let’s dive into it.

Daily Checklist

It isn’t hard to buy this versatile machinery. Nevertheless, you’ll need to be very careful so you can maintain its performance for a longer time. To do that, you’ll need to follow a strict procedure to ensure the production is not affected due to errors like blockages or poor air supply.

The daily maintenance of CNC machinery for sale you got should be as follows:

• Make sure the hydraulic fluids are at the right level.
• Check the hydraulic pressure level.
• Ensure the operational level of the cooling system is at the right level.
• Replenish the lube, if needed.
• Clean the pan chips, windows, and doors of the machine.
• Check the stainless steel covers, and lubricate them with hydraulic oil.

 

Weekly and Three-Month Checklist

For weekly care or after every 40 hours of operation, you’ll need to clean the filter of the CNC cabinet to ensure the air is flowing smoothly through the cooling unit. However, when it comes to the quarterly care i.e. 3 months, you’ll need to perform the following:

• Check the chip conveyor. Grease the chain to continue the smooth flow of work.
• Also, check the coolant tank filters to make sure they are clean.

 

Six-Month Checklist

After every six months or 1000 hours of use, the machines will need professional care from Flint Machine. Make sure you get the following maintenance services:

• Confirm that the coolant tank’s chip is cleaned and oiled.
• Take off the chuck and jaws from the machine and have them cleaned.
• Ask them to drain the hydraulic tank and replace the oil with a fresh one. Also, make sure they check the filters to see if they need to be cleaned or changed.
• Have them check the radiator to make sure it’s clean and the fins are straight.
• Ask them to drain and clean the lubrication unit. Also, make sure they add new lube.
• If your CNC machinery has a cooling unit make sure it is cleaned and refilled as well.
• Lastly, have them check the machine level. Ask them to see if there are any other repairs needed.

 

Annual Checklist

Due to frequent use of your CNC machinery for sale, make sure you get the following annual services:

• Spindle check: To ensure there are no radial or endplay issues.
• Cylinder check: To see there are no run-outs.
• Tailstock check: To ensure there are no misalignments.
• Inclination check: To confirm it is at the right level.
• Oil and air check: To ensure there are no leaks.
• Headstock check: To make sure there are no misalignments or damage.

 

We recommend getting the annual checks to maintain the levelness, accuracy, and functionality of the machine.

As it is said, early prevention is better. It goes for machinery as well. Contact our CNC machine tool distributor in Georgia and Southeast to get professional services for the equipment today.